Fastener Inspection Articles

Inspecting Square Socket Recesses

Fastener Drive Systems Need to be Checked

Inspecting NPT Threads

Inspecting NPTF Threads

Inspecting SAE Tapered Threads

Measuring Plating Thickness on Fasteners

Two Measures are Required to Assure 6 Lobe Recess Quality

Inspecting Hex Socket Recesses

How to Effectively Inspect Knurls

How Do Two or More Gages Yield Different Measurements in the Same Recess?

Inspecting Square Socket Recesses

When is a Bolt Suitable for Reuse?

Measuring Flat Head Screws Correctly

Inspecting Countersunk Screw Heads

Inspection Acceptance Interpretation for Flower-Shaped Washer Heads

Measuring Hex Wrenching Height

Eliminate First Piece Inspection

Hex Head Cap Screws Have Five Length Dimensions That Must Be Inspected

Inch Machine Screws Must Meet ANSI/ASME B18.6.3

Measuring Dowel Pins is Tougher Than You Think

Inspecting Nuts Can Minimize Customer Problems

https://www.greensladeandcompany.com/wp-content/uploads/pdf/articles/inspection/Inspection-Nuts.pdf

PPAP Production Part Approval Process (PPAP) Explained

Recess Concentricity Becomes More Critical in the Age of Automation

Fastener Drive System Quality Must Not Be Ignored in Inspection

All Tapping Screws with Recessed Heads Should Be Inspected for Recess Wobble

Recess Penetration Gaging System

Inspecting Slotted Recesses

PROOF.pdf”]

Determining the Quality of Sems Products

Square Socket Recess Inspection Gets Clarification in the New IFI Standards Book

.pdf”]

Inspecting Screw and Bolt Straightness

A Path to Shipping Zero Defect Parts

Measurement of Miniature Screw Threads

Measurement of Non-Standard Fasteners

Zero Defect Parts